Allied Telesis AT-S63 - Manual (Page 426)

Chapter 23: Internet Group Management Protocol (IGMP) Snooping Commands
426 Section III: Snooping Protocols
DISABLE IGMPSNOOPING
Syntax
disable igmpsnooping
Parameters
None.
Description
This command deactivates IGMP snooping on the switch.
Example
The following command deactivates IGMP snooping:
disable igmpsnooping
Equivalent Command
set ip igmp snoopingstatus=disabled
For information, refer to “SET IP IGMP” on page 428.
AlliedWare Plus
Command
Syntax
no ip igmp snooping
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no ip igmp snooping
Command
Available
AlliedWare Plus