Allied Telesis AT-S63 - Manual (Page 537)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 537
PURGE RSTP
Syntax
purge rstp
Parameters
None.
Description
This command returns all the RSTP bridge and port parameters to the
default settings. RSTP must be disabled before you use this command. To
disable RSTP, refer to “DISABLE RSTP” on page 535.
Example
The following command resets RSTP:
purge rstp
Equivalent Command
set rstp default
For information, refer to “SET RSTP” on page 538.