Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 549
Advertising
AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols
549
AlliedWare Plus
Command
Syntax
To display the bridge RSTP settings:
show spanning-tree detail
To display the RSTP status of the ports:
show spanning-tree interface
port
Mode
User Exec mode and Privileged Exec mode
Description
The first command is equivalent to the SHOW RSTP command without
either of the parameters. The second command is equivalent to the
PORTSTATE parameter. There is no equivalent AlliedWare Plus
command for the PORTCONFIG parameter.
Examples
This command displays the bridge RSTP settings:
awplus# show spanning-tree detail
This command displays the RSTP states for ports 1 to 4:
awplus# show spanning-tree interface 1-4
Advertising