Set date, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 78
Chapter 3: Basic Switch Commands
78
Section I: Basic Operations
SET DATE
Syntax
set date=
dd-mm-yyyy
Parameter
date
Specifies the date for the switch in day-month-year
format.
Description
You use this command to manually set the date on the switch in the event
you are not using an SNTP server. The switch maintains the date even
when the unit is powered off or reset.
Example
This command sets the switch’s date to December 11, 2004:
set date=11-12-2004
AlliedWare Plus
Command
Syntax
clock set
hh:mm:ss
dd-mm-yyyy
Mode
Privileged Exec mode
Description
This AlliedWare Plus command is used to manually set both the date and
the time. The command must include both the date and the time.
Example
This example sets the time to 2:15 pm and the date to February 4, 2009:
awplus> enable
awplus# clock set 14:15:0 4-2-2009
Command
Available
AlliedWare Plus