Enable poe port – Allied Telesis AT-S63 User Manual
Page 415
Advertising
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
415
ENABLE POE PORT
Syntax
enable poe port=
port
Parameters
port
Specifies a port. You can configure more than one port
at a time. For instructions on how to enter port
numbers, refer to “Port Numbers in Commands” on
page 47.
Description
This command activates PoE on the ports. The default setting for PoE is
enabled.
Examples
This commands activates PoE on port 2:
enable poe port=2
Advertising