Show enco, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 772
Chapter 41: Encryption Key Commands
772
Section IX: Management Security
SHOW ENCO
Syntax
show enco key[=
key-id
]
Parameters
key
Specifies the ID of a specific key whose information
you want to display. Otherwise, all keys are displayed.
Description
This command displays information about encryption key pairs stored in
the key database. This command displays the following information about
each key:
ID
Algorithm
Length Digest
Description
Example
The following command displays the information for encryption key 1:
show enco key=1
AlliedWare Plus
Command
Syntax
show crypto key hostkey
Modes
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus# show crypto key hostkey
Command
Available
AlliedWare Plus