Allied Telesis AT-S63 - Manual (Page 91)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 91
Examples
The following command displays all the switch parameter settings that
have been changed from their default values:
show config dynamic
The following command displays the non-default parameter settings for
IGMP snooping:
show config dynamic=igmpsnoop
SSL Secure Sockets Layer protocol
STP Spanning Tree, Rapid Spanning, and Multiple
Spanning Tree protocols
SWITCH Switch console timer, console startup mode,
serial port baud rate, Telnet server
SYSTEM Administrator name, switch name, and switch
location
VLAN Port-based and tagged VLANs, and multiple
VLAN modes
WEBSERV Web server
Table 3. Module Variable (Continued)
Variable Description