Enable igmpsnooping, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 427
Advertising
AT-S63 Management Software Command Line User’s Guide
Section III: Snooping Protocols
427
ENABLE IGMPSNOOPING
Syntax
enable igmpsnooping
Parameters
None.
Description
This command activates IGMP snooping on the switch.
Example
The following command activates IGMP snooping:
enable igmpsnooping
Equivalent Command
set ip igmp snoopingstatus=enabled
For information, refer to “SET IP IGMP” on page 428.
AlliedWare Plus
Command
Syntax
ip igmp snooping
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# ip igmp snooping
Command
Available
AlliedWare Plus
Advertising