Set switch port filtering – Allied Telesis AT-S63 User Manual

Page 163

Advertising
background image

AT-S63 Management Software Command Line User’s Guide

Section I: Basic Operations

163

SET SWITCH PORT FILTERING

Syntax

set switch port=

port

[bcastfiltering=yes|no|on|off|true|false|enabled|
disabled]
[bcastegressfiltering=yes|no|on|off|true|false|enabled|
disabled]
[unkmcastfiltering=yes|no|on|off|true|false]
[unkmcastegressfiltering=yes|no|on|off|true|false]
[unkucastfiltering=yes|no|on|off|true|false]
[unkucastegressfiltering=yes|no|on|off|true|false]

Parameters

port

Specifies the port you want to configure. You
can configure more than one port at a time.

bcastfiltering

Controls the ingress broadcast frame filter. The

options are:

yes, on, true, enabled The port discards all

ingress broadcast
frames. These options
are equivalent.

no, off, false, disabled The port forwards all

ingress broadcast
frames. This is the
default. These options
are equivalent.

bcastegressfiltering

Controls the egress broadcast frame filter. The

options are:

yes, on, true, enabled The port discards all

egress broadcast
frames. These options
are equivalent.

no, off, false, disabled The port forwards all

egress broadcast
frames. This is the
default. These options
are equivalent.

unkmcastfiltering

Controls the unknown ingress multicast frame

filter. The options are:

yes, on, true, enabled The port discards all

Advertising