Allied Telesis AT-S63 - Manual (Page 651)

AT-S63 Management Software Command Line User’s Guide
Section VII: Internet Protocol Routing 651
DELETE IP ARP
Syntax
delete ip arp= ipaddress
Parameters
arp Specifies the IP address of the host to be deleted
from the ARP cache.
Description
This command deletes static and dynamic ARP entries from the ARP
cache. This command can delete only one ARP entry at a time. To view
the entries in the cache, refer to “SHOW IP ARP” on page 672.
The AT-9408LC/SP, AT-9424T/GB, and AT-9424T/SP Switches do not
support this command.
Example
This command deletes the ARP entry for a host with the IP address
149.42.67.8:
delete ip arp=149.42.67.8
AlliedWare Plus
Command
Syntax
no arp ipaddress
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Examples
This example deletes the ARP entry for the IP address 149.76.32.2:
awplus> enable
awplus# configure terminal
awplus(config)# no arp 149.76.32.2
Command
Available
AlliedWare Plus