Allied Telesis AT-S63 - Manual (Page 334)

Chapter 18: Access Control List Commands
334 Section II: Advanced Operations
discards the packets provided that the packets do not also meet the
criteria of a classifier of a Permit ACL assigned to the same port.
ˆ Classifier List - The classifiers assigned to the ACL.
ˆ Port List - The ports where the ACL is assigned.
ˆ Is Active - The status of the ACL. An ACL is active if it is assigned to at
least one port, and inactive if it is not assigned to any ports.
Examples
This command displays all the ACLs:
show acl
This command displays ACL ID 22:
show acl=22
AlliedWare Plus
Command
Syntax
show access-list id_number
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command displays all the classifiers and the access
control lists. The standard command displays just the access control lists.
Examples
This command displays all the classifiers and the access control lists:
awplus# show access-list
This command displays the classifier and the access control list with the
ID number 4:
awplus# show access-list 4