Delete bootp relay – Allied Telesis AT-S63 User Manual
Page 689
Advertising
AT-S63 Management Software Command Line User’s Guide
Section VII: Internet Protocol Routing
689
DELETE BOOTP RELAY
Syntax
delete bootp relay=
ipaddress
Parameters
ipaddress
Specifies the IP address of a DHCP or BOOTP server
to be deleted from the switch.
Description
This command deletes the IP address of a DHCP or BOOTP server from
the switch. You can delete only one address one at a time with this
command.
Example
This example deletes the server IP address 145.42.19.162:
delete bootp relay=145.42.19.162
Advertising