Allied Telesis AT-S63 - Manual (Page 270)

Chapter 15: File Download and Upload Commands
270 Section II: Advanced Operations
UPLOAD METHOD=REMOTESWITCH
Syntax
upload method=remoteswitch
srcfile|file=
filename |appblock|switchcfg
switchlist= switches [verbose=yes|no|on|off|true|false]
Parameters
method Specifies a switch to switch upload.
srcfile or file Specifies the file to be uploaded from the master switch.
Options are:
filename Uploads a configuration file from the
master switch’s file system.
appblock Uploads the master switch’s AT-S63
image file.
switchcfg Uploads the master switch’s active boot
configuration file.
switchlist Specifies the switches in an enhanced stack to receive
the uploaded file. To view the switches, refer to “SHOW
REMOTELIST” on page 104. You can specify more than
one switch at a time (for example, 1,3,4).
verbose Specifies whether to display details of the upload
operation. The options are:
yes, on, true Display the upload details. The options are
equivalent.
no, off, false Do not display the upload details. The
options are equivalent.
Description
This command uploads the AT-S63 file image or a boot configuration file
from a master switch to other switches in an enhanced stack. This is refer
to as a switch to switch upload. You can use this command to simplify the
task of updating the AT-S63 image file in the switches of an enhanced
stack. By updating the image file on the master switch first, you can
instruct the master switch with this command to update the other switches
in the stack, automatically.