Allied Telesis AT-S63 - Manual (Page 557)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 557
DESTROY MSTP MSTIID
Syntax
destroy mstp mstiid= mstiid
Parameter
mstiid Specifies the MSTI ID of the spanning tree instance you
want to delete. You can specify only one MSTI ID at a
time. The range is 1 to 15.
Description
This command deletes multiple spanning tree instances and returns the
VLANs of the deleted MSTIs to CIST.
Example
The following command deletes the spanning tree instance 4:
destroy mstp mstiid=4
AlliedWare Plus
Command
Syntax
no instance mstiid
Mode
Multiple spanning tree mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
These commands delete MSTI 4:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree mst configuration
awplus(config-mst)# no instance 4
Command
Available
AlliedWare Plus