Allied Telesis AT-S63 - Manual (Page 65)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 65
DISABLE TELNET
Syntax
disable telnet
Parameters
None.
Description
This command disables the Telnet server on the switch. You might disable
the server to prevent anyone from managing the switch with the Telnet
application protocol or in the event you decide to use the Secure Shell
protocol for remote management. The default setting for the Telnet server
is enabled.
Example
The following command deactivates the Telnet server:
disable telnet
AlliedWare Plus
Command
Syntax
no service telnet
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no service telnet
Command
Available
AlliedWare Plus