Allied Telesis AT-S63 - Manual (Page 613)

AT-S63 Management Software Command Line User’s Guide
Section VI: Virtual LANs 613
SHOW GARP DATABASE
Syntax
show garp=gvrp db|database
Parameters
garp Specifies the GARP application to be displayed.
GVRP is the only GARP application supported by the
AT-9400 Switch.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the internal database
for the GARP application. Each attribute is represented by a GID index
within the GARP application.
ˆ GARP Application
ˆ GID Index
ˆ Attribute
ˆ Used
Example
The following command displays the database for all GARP applications:
show garp=gvrp database