Allied Telesis AT-S63 User Manual
Page 491
AT-S63 Management Software Command Line User’s Guide
Section IV: SNMPv3
491
storagetype
Specifies the storage type of this table entry. This is
an optional parameter. The options are:
volatile
Does not allow you to save the table
entry to the configuration file on the
switch. This is the default.
nonvolatile
Allows you to save the table entry to
the configuration file on the switch.
Description
This command modifies an SNMPv3 Access Table entry.
Examples
The following command modifies the group called engineering. The new
read view is the Internet MIBs and the storage type is volatile storage.
set snmpv3 access=engineering securitymodel=v3
securitylevel=authentication readview=internet
storagetype=volatile
The following command modifies the group called training. The read view,
write view, and notify view are set to the Internet MIBs. The storage type is
nonvolatile storage.
set snmpv3 access=training securitymodel=v3
securitylevel=privacy readview=internet writeview=internet
notifyview=internet storagetype=nonvolatile