Disable authentication, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 807
AT-S63 Management Software Command Line User’s Guide
Section IX: Management Security
807
DISABLE AUTHENTICATION
Syntax
disable authentication
Parameters
None.
Description
This command disables TACACS+ and RADIUS manager account
authentication on a switch or stack. When you disable authentication you
retain your current authentication parameter settings.
Note
This command applies only to the TACACS+ and RADIUS manager
accounts. Disabling authentication means that you must use the
default manager accounts of manager and operator to manage the
switch. This command does not affect 802.1x port-based access
control.
Example
The following command disables TACACS+ and RADIUS manager
account authentication on the switch:
disable authentication
AlliedWare Plus
Command
Syntax
login local
Mode
Line Console mode
Description
This AlliedWare Plus command is identical to the standard command.
Command
Available
AlliedWare Plus