Disable poe port – Allied Telesis AT-S63 User Manual
Page 414
Advertising
Chapter 22: Power Over Ethernet Commands
414
Section II: Advanced Operations
DISABLE POE PORT
Syntax
disable poe port=
port
Parameters
port
Specifies a port. You can configure more than one port
at a time. For instructions on how to enter port
numbers, refer to “Port Numbers in Commands” on
page 47.
Description
This command disables PoE on a port. The default setting for PoE on a
port is enabled. Ports provide standard Ethernet connectivity even when
PoE is disabled.
Examples
This command disables PoE on ports 5 and 7:
disable poe port=5,7
Advertising