Allied Telesis AT-S63 - Manual (Page 535)

AT-S63 Management Software Command Line User’s Guide
Section V: Spanning Tree Protocols 535
DISABLE RSTP
Syntax
disable rstp
Parameters
None.
Description
This command disables the Rapid Spanning Tree Protocol. To view the
current status of RSTP, use “SHOW RSTP” on page 546.
Example
The following command disables RSTP:
disable rstp
AlliedWare Plus
Command
Syntax
no spanning-tree rstp enable bridge-forward
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no spanning-tree rstp enable bridge-forward
Command
Available
AlliedWare Plus