Show flash, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 251
AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations
251
SHOW FLASH
Syntax
show flash
Parameter
None
Description
This command displays information about the file system in the switch.
The information includes the number of files stored in the file system, how
much space is used, and the amount of space available. An example is
shown in Figure 46.
Figure 46. SHOW FLASH Command
Example
show flash
AlliedWare Plus
Command
Syntax
show file systems
Mode
User Exec mode and Privileged Exec mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus# show file systems
Command
Available
AlliedWare Plus
Flash:
-----------------------------------------------------
Files ............. 12288 bytes (5 files)
Free ............. 8211456 bytes
Total .............. 8223744 bytes
-----------------------------------------------------