Allied Telesis AT-S63 - Manual (Page 166)

Chapter 8: Port Parameter Commands
166 Section I: Basic Operations
SET SWITCH PORT RATELIMITING
Syntax
set switch port= port
[bcastratelimiting=yes|no|on|off|true|false|enabled|
disabled]
[bcastrate=
value ]
[mcastratelimiting=yes|no|on|off|true|false|enabled|
disabled]
[mcastrate=
value ]
[unkucastratelimiting=yes|no|on|off|true|false|enabled|
disabled]
[unkucastrate=
value ]
Parameters
port Specifies the port you want to configure. You can
configure more than one port at a time, but the ports
must be of the same medium type. For example,
you cannot configure twisted pair and fiber optic
ports with the same command.
bcastratelimiting Enables or disables rate limit for ingress broadcast
packets. The options are:
yes, on, true, enabled Activates broadcast
packet rate limiting on the
port. The options are
equivalent. The rate limit
is set with the
BCASTRATE parameter.
no, off, false, disabled Deactivates broadcast
packet rate limit on the
port. This is the default.
The options are
equivalent.
bcastrate Specifies the maximum number of ingress
broadcast packets a switch port accepts each
second. The range is 0 to 262,134 packets. The
default is 262,134 packets
mcastratelimiting Enables or disables a rate limit for ingress multicast
packets. The options are:
yes, on, true, enabled Activates multicast
packet rate limit on
the port. The options
are equivalent.