Allied Telesis AT-S63 - Manual (Page 115)

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 115
Description
This command is used to identify the IP address of a SNTP server. The
SNTP client is automatically activated after you enter this command. The
other management interfaces have different commands for defining the IP
address of the server and for activating the client.
Example
This example defines the IP address of the SNTP server as 148.77.122.54
and activates the client:
awplus> enable
awplus# configure terminal
awplus(config)# ntp server 148.77.122.54