Allied Telesis AT-S63 - Manual (Page 794)

Chapter 44: Secure Shell (SSH) Commands
794 Section IX: Management Security
DISABLE SSH SERVER
Syntax
disable ssh server
Parameters
None.
Description
This command disables the Secure Shell server. When the Secure Shell
server is disabled, you cannot remotely manage the unit with a Secure
Shell client. The default setting for the Secure Shell server is disabled.
Example
The following command disables the Secure Shell server:
disable ssh server
AlliedWare Plus
Command
Syntax
no service ssh
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no service ssh
Command
Available
AlliedWare Plus