Allied Telesis AT-S63 - Manual (Page 756)

Chapter 40: Web Server Commands
756 Section IX: Management Security
DISABLE HTTP SERVER
Syntax
disable http server
Parameters
None.
Description
This command disables the web server on the switch. When the server is
disabled, you cannot manage the switch from a web browser. To view the
current status of the web server, see “SHOW HTTP SERVER” on
page 764. The default setting for the web server is enabled.
Example
The following command disables the web server:
disable http server
AlliedWare Plus
Command
Syntax
no service http
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
awplus> enable
awplus# configure terminal
awplus(config)# no service http
Command
Available
AlliedWare Plus