Allied Telesis AT-S63 - Manual (Page 80)

Chapter 3: Basic Switch Commands
80 Section I: Basic Operations
SET PASSWORD OPERATOR
Syntax
set password operator
Parameters
None.
Description
This command sets the operator’s password. Logging in as operator
allows you to only view the switch parameters. The default password is
“operator.” The password can be from 0 to 16 alphanumeric characters.
Allied Telesis recommends that you avoid special characters, such as
spaces, asterisks, or exclamation points because some web browsers do
not accept them in passwords. The password is case sensitive.
Example
The following command changes the operator’s password:
set password operator
Follow the prompts to enter the new password.
Equivalent Command
set user operator password= password
For information, see “SET USER PASSWORD” on page 87.