Allied Telesis AT-S63 - Manual (Page 373)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 373
DESTROY QOS FLOWGROUP
Syntax
destroy qos flowgroup= value
Parameter
flowgroup Specifies the ID number of the flow group you want to
delete. You can delete more than one flow group at a time.
You can specify the flow groups individually, as a range, or
both.
Description
This command deletes flow groups.
Examples
This command deletes the flow group 22:
destroy qos flowgroup=22
This command deletes the flow groups 16 to 20 and 23:
destroy qos flowgroup=16-20,23
AlliedWare Plus
Command
Syntax
no class-map id_number
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This command deletes flow groups 3 and 4:
no class-map 3,4
Command
Available
AlliedWare Plus