Allied Telesis AT-S63 - Manual (Page 460)

Chapter 27: SNMPv3 Commands
460 Section IV: SNMPv3
entry to the configuration file on the
switch. This is the default.
nonvolatile Allows you to save the table entry to
the configuration file on the switch.
Description
This command creates an SNMPv3 User Table entry.
Examples
The following command creates an SNMPv3 user with the name
“steven142” with an authentication protocol of MD5, an authentication
password of “99doublesecret12”, a privacy password of “encrypt178” and
a storage type of nonvolatile.
add snmpv3 user=steven142 authentication=md5
authpassword=99doublesecret12 privpassword=encrypt178
storagetype=nonvolatile
The following command creates an SNMPv3 user with the name “77hoa”
an authentication protocol of SHA, an authentication password of
“youvegottobekidding88” and a storage type of nonvolatile.
add snmpv3 user=77hoa authentication=sha
authpassword=youvegottobekidding88 storagetype=nonvolatile