Disable sntp, Alliedware plus command – Allied Telesis AT-S63 User Manual
Page 117
Advertising
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations
117
DISABLE SNTP
Syntax
disable sntp
Parameters
None.
Description
This command is used to disable the SNTP client. The default setting for
the SNTP client is disabled.
Example
The following command disables the SNTP client:
disable sntp
AlliedWare Plus
Command
To disable the SNTP client from the AlliedWare Plus commands, refer to
the AlliedWare Plus command in “DELETE SNTPSERVER
PEER|IPADDRESS” on page 116.
Command
Available
AlliedWare Plus
Advertising