Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1114)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1098 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
778, 789, 814, 815, 855, 864, 874
Range
5 ... 25 mm/s
Default value 25 mm/s
730
Range
3 ... 25 mm/s
Default value 25 mm/s
774
Range
3 ... 12 mm/s
Default value 12 mm/s
5.6.7.5 PUMP
5.6.7.5.1 PUMP - Overview
Dialog window: Method ▶ PUMP ▶ Properties... ▶ PUMP - 'Command name'
Command for controlling pumps connected to or built into the Sample
Processor.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 778, 789, 814, 815, 855, 864
Appearance
The command has the following appearance:
Parameters
The parameters for the command PUMP are configured in the following
dialog window:
￭ PUMP - Properties
Command variables
The following command variables are generated in the method run by the
command PUMP and can be used in formulas under the designation
'Command name.Variable designation':