Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1579)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1563
9.8.4 Edit working sample table
How to proceed?
1 Select program part Workplace.
2 In subwindow Run, click on the Determination series tab.
3 If desired, load existing sample table into working sample table.
4 If desired, click on the menu item Sample table ▶ Properties... in
the subwindow Run.
The dialog window Properties - Determination series opens.
5 Define the properties for the determination series.
6 Click on [OK].
The dialog window Properties - Determination series is closed.
7 Select line to be modified in the subwindow Run.
8 Click on the menu item Edit ▶ Edit line.
The dialog window Edit line opens.
9 In the list box Method, select the desired method and enter sample
data.
10 Click on [Apply].
The sample data entered will be applied in the respective line of the
working sample table.
11 Repeat step 8 for each desired determination.
12 Click on [Close].
The dialog window Edit line is closed.
13 If desired, click on the menu item Sample table ▶ Save as... in the
subwindow Run.
The dialog window Save sample table opens.