Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1277)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1261
6.6.3.3 Properties - Titer
Tab: Configuration ▶ Titrants/solutions ▶ Properties ▶ Titer
Titer determination
Titer (value)
Titer value of the solution. The value for the titer of a solution used by the
titration commands DET, MET, SET and KFT is available for calculations
as a variable 'Command name.TITER''Command name.
Range 1E-12 ... 1E+12 (max. 10 digits)
Default value 1.000
Titer (unit)
Titer unit of the solution.
Input 10 characters
Selection mol/L | mmol/L | µmol/L | g/L | mg/L | µg/L |
mg/mL | ppm | % | mEq/L
Default value mol/L
Date titer det.
Display of the date and time of last titer determination, which is automati-
cally entered with each automatic titer determination or manual entry.
Titer method
Name of the method with which the last titer determination was carried out.
If the titer has been entered manually then manual will be shown here.
User
Short name of the user logged in during titer determination or when the
titer was entered manually. If work is not carried out using log in, then the
user logged in under Windows will be entered automatically.
Statistics
Statistical data will only be shown if the titer has been assigned by the titer
method as a mean value of a multiple determination. If the titer has been
determined with a single determination or entered manually then no statis-
tics values will be shown.
Number of titer determinations (n)
Number of determinations used to determine the titer.
Abs. standard dev. (s abs)
Absolute standard deviation for the titer determination in the units of the
titer.