4 analog inputs, 1 analog inputs - overview, 2 analog input – Metrohm tiamo 2.1 (ProcessLab) User Manual
Page 1514
8.4 Manual Control - Functions
■■■■■■■■■■■■■■■■■■■■■■
1498
■■■■■■■■
tiamo 2.1 (ProcessLab)
8.4.6.4
Analog inputs
Program part: Manual Control
8.4.6.4.1
Analog inputs - Overview
Program part: Manual Control
If in the device tree the branch Analog inputs is selected, then the adjacent
value for all connected analog inputs in their physical order is shown in the
subwindow for the graphical display.
Graphical display
Example:
8.4.6.4.2
Analog input
Program part: Manual Control
If in the device tree a single analog input is selected, then the properties of
the input are displayed in the subwindow for functions/parameters.
In the subwindow for the graphical display, the adjacent value of the input
is displayed.
Analog input
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Current value
Display of the adjacent value.