6 stir, 1 stir - overview, Stir – Metrohm tiamo 2.1 (ProcessLab) User Manual
Page 1116
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
1100
■■■■■■■■
tiamo 2.1 (ProcessLab)
Selection
1 | 2
Default value
1
Pump(s)
Selection of the pump that is to be actuated. The pump(s) can either be built-
in or externally connected. With 1+2 both pumps at the selected tower will
be switched at the same time.
Selection
1 | 2 | 1+2
Default value
1
1
Pump 1 is actuated.
2
Pump 2 is actuated.
1+2
Both pumps at the selected tower will be switched at the same time.
Actions
Selection
Switch on | Switch off | Duration
Default value
Switch on
Switch on
Switch on the pump(s).
Switch off
Switch off the pump(s).
Duration
Switch on the pump(s) for a particular period.
Range
0 ... 9999.9
Default value
10.0
Selection
s | min
Default value
s
5.6.7.6
STIR
5.6.7.6.1
STIR - Overview
Dialog window: Method
▶ STIR ▶ Properties... ▶ STIR - 'Command name'
Command for controlling a connected stirrer.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 890, 901,
902, 904, 905, 906, 907
Titrino: 751, 758, 784, 785, 795, 798, 799
Conductometer: 856