Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 136)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
120 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
ERROR
Error.
3.6.3.4 Single determination - Determination parameters
Subwindow: Run ▶ Sequence ▶ Single determination
User
If the option User name required is enabled in the security settings, then
the abbreviation of the currently registered user will be displayed in this field.
This field is then not available for editing. If work is done without registering,
then a user name can be entered in this field (only in the status READY).
Input 50 characters
Sample number
The sample number is set to 0 for all workplaces at the time of each program
start. Each time a determination is started, it is incremented by +1 . It can
be edited by the user only when it is in the status READY.
Range 0 ... 99999
Default value 0
Remark
Freely definable remarks concerning the determination, that are saved
together with the determination. Prepared sample texts can also be selected
instead of making manual entries (see Chapter 3.5.1, page 115).
Note
The field Remarks can also be modified live while determinations are
running. The context-sensitive menu item Modify remarks is used to
open the dialog window Live modifications (see Chapter 3.6.3.6, page
123).
Input 100 characters
Statistics
on | off (Default value: on)
This field is displayed only when a method has been loaded in the START
command of which the option Statistics has been enabled. The statistics
defined in the method can be enabled and disabled manually here (only in
the status READY and COND BUSY).
The first field after Statistics shows the number of determinations already
carried out for the statistics (Actual counter). This field cannot be edited, but
when it is in the status READY, it can be set to 0 with the context sensitive