Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1323)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1307
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the E-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-mail] opens the Send E-mail window.
Acoustic signal
on | off (Default value: off)
If this option is enabled, an acoustic signal will be emitted additionally to the
message defined above
Action
The actions can only be edited if monitoring for common variables is
switched on.
If during common variable monitoring it is found that the validity period has
expired then one of the following actions will be triggered automatically at
Start test:
Selection Record message | Display message | Stop deter-
mination
Default value Display message
Record message
The message that the validity period of the common variable has expired
will be automatically saved with the determination.
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period of the common variable has expired will be automat-
ically saved with the determination.
Stop determination
The running determination will be automatically canceled. The following
message must be confirmed with [OK].
6.8.3.3 Properties - History
Tab: Configuration ▶ Common variables ▶ [Edit] ▶ Properties ▶ Common variable
- 'Name' ▶ History
History table
The table contains the last 10 values for the selected common variable and
cannot be edited or sorted. The individual values are sorted according to
date so that the most up-to-date assignment is shown last.