Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1229)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1213
Note
If the backup directory is on a network drive the saving date should be
added manually to the Backup name because the saving date informa-
tion is not available when the directory is restored.
Note
Make sure that you have read and write access rights on the selected
directory.
6.2.3.2.3 Edit backup directory
Dialog window: Configuration ▶ Tools ▶ Program administration ▶ Backup direc-
tories ▶ [Edit] ▶ Edit backup directory
Name
Name for the backup directory.
Input 50 characters
Note
The Default backup directory generated during installation cannot be
renamed.
Directory
Entry or selection (with ) of the path for the backup directory.
Input 1000 characters
Note
If the backup directory is on a network drive the saving date should be
added manually to the Backup name because the saving date informa-
tion is not available when the directory is restored.
Note
Make sure that you have read and write access rights on the selected
directory.