6 stepping motors, 1 stepping motors - overview, Stepping motors – Metrohm tiamo 2.1 (ProcessLab) User Manual
Page 1517
■■■■■■■■■■■■■■■■■■■■■■
8 Manual Control
tiamo 2.1 (ProcessLab)
■■■■■■■■
1501
[Set]
Sets the analog output to the mapping value indicated.
Set default
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Current value
Display of the adjacent value.
[Set]
Resets the analog output to the default value in the configuration.
Graphical display
8.4.6.6
Stepping motors
Program part: Manual Control
8.4.6.6.1
Stepping motors - Overview
Program part: Manual Control
If in the device tree the branch Stepping motors is selected, all stepping
motors can be commonly controlled in the subwindow functions/parame-
ters. In the subwindow for the graphical display the status of all connected
stepping motors is shown in their physical order.