Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1508)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1492 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
Graphical display
Overview of the states of a digital input:
ACTIVE INACTIVE ERROR
Display flashes.
8.4.6.3 Digital outputs
Program part: Manual Control
8.4.6.3.1 Digital ouptuts - Overview
Program part: Manual Control
If in the device tree the branch Digital outputs is selected, then all outputs
can be commonly controlled on the tabs Switch on/off and Set default
in the subwindow functions/parameters. In the subwindow for the graphical
display the status of all connected digital outputs is shown in their physical
order.
Switch on/off
[Start]
Sets all digital outputs to ACTIVE.
[Stop]
Sets all digital outputs to INACTIVE.
Set default
[Set]
Resets all digital outputs to the default value in the configuration.