Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1330)

6.9 Sample solutions (TC conductivity) subwindow ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1314 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
6.9.3.2 Properties - General
Tab: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Proper-
ties... ▶ Sample solution (TC conductivity) ▶ General
Name
Name of the measurement solution for which the temperature coefficient
was determined for conductivity.
Input 50 characters
Default value 'empty'
Comment
Comments on the solution to be measured.
Input 500 characters
Default value 'empty'
6.9.3.3 Properties - TC data
Tab: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Proper-
ties... ▶ Sample solution (TC conductivity) ▶ TC data
Start temperature
Temperature at the time of the start of the measurement.
Range -20.0 ... 150.0 °C
Default value 20.0 °C
Stop temperature
Temperature at the end of the measurement.
Range -20.0 ... 150.0 °C
Default value 40.0 °C
TC min.
Minimum temperature coefficient in the temperature interval of the Cheby-
shev function, with reference to a temperature of 25°C.
Range 1E-08 ... 1E+08
Default value 1.0
TC max.
Maximum temperature coefficient in the temperature interval of the Che-
byshev function, with reference to a temperature of 25°C.
Range 1E-08 ... 1E+08
Default value 1.0