Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1516)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1500 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
8.4.6.5.2 Analog output
Program part: Manual Control
If in the device tree a single analog output is selected, then the output can
be controlled on the tabs Set value and Set default in the subwindow for
functions/parameters.
In the subwindow for the graphical display the adjacent value for the analog
output status is displayed.
Set value
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Value
Enter the value to be set on the analog output.
Current value
Display of the adjacent value.