Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 773)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 757
Titrino
Range
0.00 ... 999.99 mL
Default value 0.00 mL
Dosing rate
Speed at which the start volume is to be added. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando
Range
0.01 ... 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Range
0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a reac-
tion time after the addition of the start volume. The pause follows at the
end of all the start conditions.
Range 0 ... 999999 s
Default value 0 s
5.6.3.5.3.4 KFT Upol - Control parameters
Tab: Method ▶ KFT Upol ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Input 25 characters
Endpoint
Ep with
Measured value for the endpoint.
Range -200.0 ... 200.0 µA
Default value 25.0 µA
Selection off