Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1515)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1499
Graphical display
8.4.6.5 Analog outputs
Program part: Manual Control
8.4.6.5.1 Analog outputs - Overview
Program part: Manual Control
If in the device tree the branch Analog outputs is selected, then all outputs
can be commonly controlled on the tabs Set value and Set default in the
subwindow functions/parameters.
In the subwindow for the graphical display the adjacent value for all con-
nected analog outputs is shown in their physical order.
Set value
Value
Enter the value in % of the mapped range.
Range 0.0 ... 100.0 % Mapping
Default value 0.0 % Mapping
[Set]
Sets all analog outputs to the mapping value indicated.
Set default
[Set]
Resets all analog outputs to the default value in the configuration.
Graphical display
Example: