Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1496)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1480 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
[Start]
Start moving to target position. Start moving to target position. After the
start, the button changes to [Stop], the two lower buttons are shown as
inactive (gray) and Move... instead of Ready is displayed as status message.
Move lift upwards as long as this button is pressed.
Move lift downwards as long as this button is pressed.
Robotic arm position
Set the robotic arm position (angle) on the selected tower.
Current position
Displays the current position of the robotic arm in °.
Target position
Enter or select the robotic arm position to be moved to.
Range 0.0 ... 330.0 °
Default value 0.0 °
Selection External 1...4
[Start]
Start moving to target position. After the start, the button changes to
[Stop], the two lower buttons are shown as inactive (gray) and Move...
instead of Ready is displayed as status message.
Move robotic arm to the left (toward 0°) as long as this button is pressed.
Move robotic arm to the right (toward 330°) as long as this button is
pressed.
8.4.4.4 Sample changer - Assign position
Program part: Manual Control
Here the current rack, lift or robotic arm position can be assigned to a specific
special position.
Rack position
Assign current rack position to a specific special beaker.