5 establish a connection to the balance, Establish a connection to the balance 2 – Metrohm tiamo 2.1 (ProcessLab) User Manual
Page 1448
7.17 Balances
■■■■■■■■■■■■■■■■■■■■■■
1432
■■■■■■■■
tiamo 2.1 (ProcessLab)
Display message
A message is displayed and you can choose whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the deter-
mination.
Stop determination
The running determination will be automatically terminated. The follow-
ing message must be confirmed with [OK].
7.17.5
Establish a connection to the balance
Dialog window: Configuration
▶ Devices ▶ Properties ▶ RS 232 ▶ Connect
In order to establish a connection to a balance the button [Connect] has
to be pressed on the tab RS 232.
If then the print key on the connected balance is pressed, the data provided
by the balance will be inserted in the following fields:
Device name
Name of balance.
Sample size
Sample size.
Sample size unit
Sample size unit.
ID1
Sample identification ID1.
ID2
Sample identification ID2.