Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 79)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 63
2.4.4.5.9 Sign
Dialog window: Formula editor ▶ Operators/Functions
Syntax
y = Sign(number)
Gives the sign of the entered number: 1 for a positive number, -1 for a
negative number.
Parameters
Number
The parameter can be indicated either directly as a number or as a variable
of the type Number. If the parameter does not correspond to the expected
type, it will automatically be converted to this. If this is not possible, the
result of this operation is given as invalid.
Examples
Sign(-55.3) = -1
Sign(26.115) = 1
Sign('CV.AverageTemp') = Sign of the value of the common variable
CV.AverageTemp
2.4.4.5.10 Quantiles of the Student's t-distribution
Dialog window: Formula editor ▶ Operators/Functions
Syntax
t
s
= Tinv(Probability; Degrees of freedom)
Calculates the quantiles of the Student's t-distribution for two-sided inter-
vals.
The result describes the half interval length as a multiple of the standard
deviation of a sampling totality with given degrees of freedom within
which, with the indicated probability, the mean value of the distribution
lies, when the interval is centered on the mean value of the sampling totality.
Parameters
Probability
Type number, value range: 0 ... 1. Direct entry as number or as formula
providing a number. If the type of value is non-permitted, then the result
will become invalid. This is to indicate the probability with which the
unknown mean value of the t-distributed result is expected to lie within the
two-sided interval.
Degrees of freedom