Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1127)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 1111
Gas flow
Selection Switch on | Switch off
Default value Switch on
Switch on
Switches on the gas flow.
Switch off
Switches off the gas flow.
5.6.8 Result commands
5.6.8.1 Result commands - Overview
Menu item: Method ▶ Paste ▶ New command... ▶ Results
Commands for the calculation, storage and output of results.
The following four result commands can be selected:
￭ CALC - Overview
Calculation of intermediate and end results, titer values and common
variables.
￭ DATABASE - Overview
Storage of the determination data in data bases.
￭ REPORT - Overview
Output of a report defined by a report template.
￭ EXPORT - Overview
Export of determination data.
5.6.8.2 CALC
5.6.8.2.1 CALC - Overview
Dialog window: Method ▶ CALC ▶ Properties... ▶ CALC - 'Command name'
Command for the calculation of intermediate and end results and the
assignment of titer values and common variables.
Appearance
The command has the following appearance:
Result table
All defined results are displayed in the Result table in the properties window
of the command CALC.