Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 244)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
228 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
Note
The following fields, which do not permit page break controls, cannot be
inserted into a group field.
￭ Fixed report
￭ Curve
￭ Calibration curve
Insert
In order to insert group field into a report template the corresponding sym-
bol must be selected on the Module bar and placed on the report template
by creating a field with the left-hand mouse key.
Properties
X pos.
Shows the predefined x-position for the field.
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Width
Shows the predefined width of the fixed report.
Height
Height of the field
Range 0.0000 ... (max. page height) mm
4.4.1.4.3.9 Report template - Image
Program window: Database ▶ Report template
An image field is used for including any external graphics on the report tem-
plate. The file formats *.jpg and *.gif are supported.
Insert
In order to insert an image into a report template the corresponding symbol
must be selected on the Module bar and placed on the report template by
creating a field with the left-hand mouse key.