Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 255)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 239
Template table
The table with the defined templates cannot be edited, although it can be
sorted according to the selected column in increasing or decreasing
sequence by clicking on the column title
Template name
Shows the name of the template.
Command type
Shows the command type for which the template can be used.
Comment
Shows the comments about the template.
Functions
[New]
Generates a new template. The dialog window Properties - Overlay
curves opens in which the properties for the new template can be defined.
[Properties]
Open the dialog window Properties - Overlay curves in which the prop-
erties of the template selected in the table can be edited.
[Delete]
Delete the template selected in the table.
[Copy]
Copy the template selected in the table and save it under the name Copy
of....
4.4.3.2 Edit curve overlay templates
4.4.3.2.1 Curve overlay - Properties
Dialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay templates ▶ Prop-
erties
Template name
Name for the curve overlay template which is saved in the configuration
database per client.
Input 50 characters
Command type
Selection of the command type from which curves are to be overlaid.