Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 399)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 383
￭ ProcessLab
DIGITAL IN, DIGITAL OUT, ANALOG IN, ANALOG OUT, STEPPING
MOTOR, PORT
The new command is inserted above the selected command after confirming
the selection with [OK].
5.2.4.2.2 Select command
Subwindow: Method
A command is selected with a left mouse click. The selected command is
marked with a black border. Further commands within the same track can
be selected by pressing-down the Ctrl key while clicking on the desired
command with the left mouse button.
Non-selected command Selected command
5.2.4.2.3 Move command
Subwindow: Method
Move commands with Drag&Drop
To move commands with Drag&Drop they have to be selected first. They
can then be moved to the desired position between two commands with
the left mouse button pressed. A red arrow indicates the possible positions.
Move commands via the clipboard
To move commands via the clipboard they have to be cut first. They can
then be inserted above a selected command in an existing track.
5.2.4.2.4 Copy command
Subwindow: Method
Copy commands with Drag&Drop
To copy commands with Drag&Drop they have to be selected first. They can
then be copied to the desired position with the left mouse button and Ctrl
key simultaneously pressed. A red arrow indicates the possible positions.
Copy commands to the clipboard
The selected commands are copied to the clipboard with Edit
▶ Copy the
context-sensitive menu item Copy or with the icon .